Guides
Tools
Per product
Step by step how to use each product and get the best result.
How to apply Koch Chemie PW Protector Wax: neat or diluted, by hand or through a foam gun, plus the right dosage and tips for tight water beading.
How to clean your wheels with Koch Chemie MWC: spray on acid-free and ready to use, let the colour indicator react, then rinse off safely.
How to remove fallout from wheels and paint with D-CON V4: spray on, let it react until the colour changes and rinse thoroughly. Ready to use and acid-free.
One cleaner for your whole interior: how to use D-CON C.I.A. on dashboard, leather, plastic and screens, with a matte finish and no greasy film.
Streak-free car glass in four steps. How to use D-CON Streak Free, when to dilute and how the two-towel method prevents streaks.
A pH-neutral pre-wash that is safe on coating, wax and PPF. How to dose GSF for the foam cannon or as a contact shampoo, and how long to let it dwell.
Grey for cutting, green for medium correction, yellow for gloss, white for the last holograms and the wax. How to pick the right Delta Pro pad per step on a dual-action machine.
A concentrated, alcohol-based glass cleaner. Undiluted for heavy soiling or 1:3 with osmosis water for maintenance. How to work streak-free with the gloss additive.
A 1800 gsm double-sided plush drying towel of 80x50 cm. High water absorption, safe on coating and PPF. How to dry a large car in fewer passes without streaks.
HydroCharge is a SiO2-based ceramic spray coating that you apply in a few minutes and that gives up to twelve months of protection and a deep, wet gloss. How to apply it, standalone or as a booster.
A pH-neutral shampoo with SiO2 that cleans and leaves gloss and beading at the same time. Dilute 1:200 (50 ml per 10 litres), wash with the two-bucket method and build up protection with every wash.
Eulex quickly dissolves tar, adhesive residue, tree sap and rubber marks and is safe on paint, glass and metal. Apply it undiluted to a dry towel, wipe the spot and repeat on stubborn residue.
Top Star is a care emulsion for plastic and rubber in the interior. Spray onto an application sponge, apply evenly, let it dwell briefly and buff to a natural, satin-matt finish with UV protection.
Pol Star is a pH-neutral interior cleaner that is safe on leather, alcantara, upholstery and carpet. Dilute 1:5 for heavy dirt to 1:20 for light, let it dwell and wipe the residue with a damp microfiber cloth.
One-Step Polish does three things in one step: it removes swirls and light scratches, finishes to a high gloss and leaves a protective wax layer. Apply by machine with a DA or rotary polisher on a foam pad.
How to use Bilt Hamber Auto-Foam as a non-caustic pre-wash: dilute, apply and rinse for a scratch-free contact wash.
How to care for car leather with Koch Chemie LS Leather Star: clean first, apply evenly and let it dry for supple, protected leather.
How to clean smooth car leather with Colourlock Mild Leather Cleaner: foam it onto a sponge or brush, clean seam to seam and wipe with a damp cloth.
How to remove deep scratches and sanding marks with Menzerna Heavy Cut Compound 400: pad, machine, speed and the right technique for a crisp, glossy finish.
How to remove swirls and light scratches with Menzerna Medium Cut Polish 2500: pad, speed, technique and the finishing step for a hologram-free gloss.
How to care for exterior plastic, rubber and tyres with Koch Chemie PSS Plast Star: silicone-free application for an even, matte factory look.
How to use Koch Chemie Green Star: a concentrated alkaline all-purpose cleaner you dilute per job, from exterior to interior.
How to use Koch Chemie AS Car Shampoo: a phosphate-free shampoo that rinses clean, with the right dilution for the weekly hand wash.
How to remove iron fallout and baked-on brake dust with Koch Chemie RRR: spray on acid-free, wait for the purple reaction and rinse thoroughly.
How to remove insect remains and road grime with Koch Chemie Insect & Dirt Remover: spray on neat, let it dwell briefly and rinse before you wash.
How to repair cracks, holes and scratches in leather with the Leather Expert Leather Repair Kit: restore the structure first, then fill, colour and finish.
How to recolour leather with Leather Expert Leather Colourant: prepare well, apply thin layers of water-based paint and finish with a top coat.
How to restore a dull or shiny black leather steering wheel with the Leather Expert restoration kit: prepare, degrease, recolour and seal.
How to feed car leather with Leather Expert Leather Conditioner: apply to clean leather, let it soak in and buff for supple, colour-rich leather.
How to fill cracks, holes and scratches in leather with Leather Expert Leather Filler: clean, degrease, build up thinly with the spatula and sand.
How to care for open, unpigmented aniline leather with Leather Expert Leather Aniline Cream: do the water-drop test first, then clean and apply thinly in layers.
How to fully tackle a leather steering wheel with the Leather Expert Steering Wheel Care & Repair Kit: clean, prepare, recolour, fill minor damage and condition.
How to tackle heavily soiled car leather with the Leather Expert Strong Care Kit: deep-clean first with the strong cleaner, then feed with the conditioner.
How to clean smooth car leather with Leather Expert Leather Cleaner: apply with a sponge or brush, let it dwell briefly, wipe off, then condition.
How to soften dried, stiff leather with Leather Expert Leather Softener: clean, massage in thinly and let it soak in layers.
How to remove flying rust and iron particles with Shiny Garage D-Tox: spray onto cool paint, let it react until it bleeds purple, and rinse off.
How to remove flying rust with Bilt Hamber Korrosol: spray the non-alkaline, pH-balanced fallout remover onto cool paint, let it react and rinse off.
How to use D-CON Light as a pre-cleaner and iron remover: after washing, spray onto paint and glass, let it react until it turns purple and rinse before claying.
How to clean your wheels with Bilt Hamber Auto-Wheel: spray the non-acid reactive wheel cleaner onto dry wheels, let it react until red and rinse off.
How to use D-CON MangoYellow Quick Detailer: spray onto clean, dry paint and buff for quick gloss and an antistatic, dust-repelling finish.
How to use D-CON Crystal Clear APC: dilute the colourless, odourless all-purpose cleaner to the job, apply, let it dwell briefly and wipe off. Safe on almost any surface.
How to wash your car with D-CON Mint Splash Shampoo: pH-neutral and wax-safe, 50 ml per 20 litres of water, with the two-bucket method for a streak-free gloss.
How to use D-CON Ceramic Wash: a ceramic shampoo that adds a hydrophobic layer while washing for extra gloss and water repellency.
How to use D-CON Lightning Wet Coat: after washing, spray onto wet paint and rinse straight off for instant gloss and extreme water repellency, without buffing.
How to use D-CON Pro Ceramic Quick Detailer: spray onto clean, dry paint and buff for SiO2 gloss, water beading and protection that lasts for weeks.
How to use Koch Chemie SO.02 Spray Sealant: spray once or twice onto clean, dry paint, let it flash off briefly and buff for gloss and a water-beading surface.
How to use D-CON Snow Foam: dilute the concentrate (about 1:10), apply with a foam lance and let it dwell to remove loose dirt before you touch the paint.
How to use Bilt Hamber Surfex HD: dilute the heavy-duty all-purpose cleaner and degreaser to the job, apply to a cool surface, let it dwell and rinse.
How to use Koch Chemie MZR Mehrzweckreiniger: dilute the strongly alkaline intensive cleaner (1:5 to 1:50), apply to a cool surface, let it dwell and wipe off.
How to use ProElite General GT: spray the ready-to-use interior all-purpose cleaner onto the dashboard, plastic or upholstery, let it dwell briefly and wipe dry.
How to use Koch Chemie All Around: spray the pH-neutral, ready-to-use surface cleaner neat, let it dwell briefly and wipe streak-free.
How to use Bilt Hamber Hydrate-80: apply the rust converter to de-rusted, degreased spots in two coats, turn iron oxide into a stable base and then overcoat it.
How to use Bilt Hamber Dynax-S50: inject the self-healing cavity wax into box sections, sills and doors with the lance, and leave cavities open for 48 hours to off-gas.
How to use Bilt Hamber Dynax-UB: apply the firm, black underbody wax to a dry underbody in at least two coats, 24 hours apart. Abrasion-resistant and does not peel.
How to use Bilt Hamber Dynax-UC: apply the clear anti-corrosion wax in fine, light coats on visible areas like wheel arch lips and sills, safe over paint.
How to use Bilt Hamber Atom-Mac: dilute the water-based corrosion inhibitor 2 to 5 percent in water and spray it for an invisible protective shield on the underbody and braking surfaces.
