Shiny Garage D-Tox Iron & Fallout Remover

Shiny Garage D-Tox Iron & Fallout Remover chemically dissolves embedded iron particles and brake dust from wheels and paint without any mechanical scrubbing. Spray it on, wait a few minutes, rinse off.

During the dwell time the product turns purple or red wherever iron particles are present. That color reaction is the visual confirmation that the chemistry is doing its job, the more intense the color, the heavier the iron contamination in that spot.

The 1-litre pack is a professional volume, enough for multiple full treatments of both wheels and paint panels. Shiny Garage is upfront about the smell: it is strong, so work outdoors or in a well-ventilated area and wear gloves throughout. D-Tox is a reliable first step in the decontamination phase before clay treatment or ceramic coating application.

What's inside

1 bottle Shiny Garage D-Tox Iron & Fallout Remover, 1000 ml

Why this product

• Chemical decontamination, no mechanical scrubbing required, keeping scratch risk on paint and wheels minimal

• Color reaction (purple/red) makes iron contamination immediately visible and shows exactly where contamination is sitting

• Works on wheels and on paint as preparation for clay treatment or ceramic coating application

• 1-litre professional volume: enough for multiple full treatments of both wheels and paint panels

• Removes sintered brake dust and iron particles that regular shampoo alone will never fully dissolve

How to use

1. Pre-wet the surface (Rinse the wheel or the paint section to be treated with water. A wet surface helps the product spread evenly and maximises contact area.)

2. Spray D-Tox (Apply an even coat of D-Tox to the wheel or paint panel. Cover all angles and recesses thoroughly, including hard-to-reach areas.)

3. Allow to dwell and watch for the purple reaction (Let it sit for a few minutes. You will see purple or red appear where iron particles are present. Do not let it dry, rinse off before the surface dries.)

4. Rinse thoroughly (Rinse off completely with water. Use a wheel brush on wheels to remove any loosened residue. Wear gloves throughout due to the strong odor.)

Pair D-Tox with Bilt-Hamber Auto Clay and D-CON Clay Lube for a complete decontamination sequence before polishing.