D-CON Detailing Clay Bar Yellow Medium 100g

After every wash, contamination remains embedded in the paint that you cannot wash away: iron particles, rail dust, overspray and brake dust bonded to the surface. The D-CON Clay Bar Yellow Medium mechanically lifts these contaminants out. Spread lubricant over the panel, glide the clay bar across, then wipe with a clean microfibre cloth. Result: paint smooth as glass, ready for wax, sealant or ceramic coating. The 100 g block is reusable; fold and knead the clay to expose a clean section. Compatible with paint, glass, plastic and metal.

What's inside

1 D-CON Clay Bar Yellow Medium, 100 g block

Why this product

• Medium strength: effectively removes iron deposits, overspray and rail dust without being aggressive on paint

• 100 g block: enough for multiple vehicle treatments

• Multi-surface: works on paint, glass, plastic and metal exterior surfaces

• Reusable: knead the clay for a clean section after each used portion

How to use

1. Wash the vehicle and spray lubricant generously onto the panel (Adequate lubrication is essential; too little increases scratch risk)

2. Move the clay bar in straight, overlapping passes with light pressure (The clay picks up contamination naturally; no need to push hard)

3. Fold and knead the clay regularly until clean material is visible (Dark marks indicate absorbed contamination; always move to a clean section)

4. Wipe the panel with a microfibre cloth, then apply wax or sealant (The decontaminated surface bonds protection more effectively)

Use the D-CON Clay Bar with D-CON Clay Lube and a microfibre cloth for a complete decontamination pass before applying wax or sealant.