Shiny Garage Smooth Clay Lube

Shiny Garage Smooth Clay Lube is the lubricant you need for every clay bar or clay mitt treatment. Without sufficient slip the clay drags across the paint and causes marring, which then requires a separate polishing step to correct. With Smooth Clay Lube the clay glides smoothly over paint, glass and other hard surfaces and picks up bonded contamination without damaging the finish. The easy-on / easy-off formula leaves no greasy residue and the surface is immediately ready for the next step such as polish or coating. Available in 500 ml for per-vehicle use and 5 L for intensive or professional application.

What's inside

1 bottle of Shiny Garage Smooth Clay Lube (500 ml or 5 L) for clay bar and clay mitt treatment on paint, glass and other hard surfaces.

Why this product

• Optimal slip: allows clay bar and clay mitt to glide without resistance over paint and glass

• Marring prevention: minimises paint damage from clay when applied correctly

• Easy on / easy off: leaves no greasy residue after claying on paint or glass

• Wide application: suitable for paint, glass and other hard surfaces such as chrome

• Two sizes: 500 ml per vehicle and 5 L for professional use

How to use

1. Prepare the surface (Wash the vehicle thoroughly and remove loose contamination. A clean surface is the foundation for an effective clay treatment on paint and glass.)

2. Spray Clay Lube onto surface and clay (Apply 4-6 sprays to a section of approximately 30x30 cm and generously moisten the clay bar or clay mitt with Clay Lube.)

3. Guide the clay across the surface (Move the clay bar or clay mitt with light pressure in straight lines across the section. Add more Clay Lube whenever you feel resistance to avoid scratch risk.)

4. Wipe with a dry microfiber cloth (After claying, wipe off the remaining lubricant with a dry microfiber cloth. The surface is now ready for polish, sealant or coating.)

Use Smooth Clay Lube alongside Bilt-Hamber Auto Clay for a complete decontamination step, followed by Shiny Garage D-Tox for iron particles and Chemical Guys HydroCharge as a finishing coating on the treated paint.