D-CON Delta Fiber Pro Microfibre Polishing Pad Medium Yellow

The D-CON Delta Fiber Pro polishing pad in medium yellow is designed to remove moderate paint defects such as swirls and holograms on fully cured paint. The microfibre top layer delivers good correction and is ideal for moderate polishing work, such as removing wash scratches. Between the hook-and-loop backing and the microfibre sits a 15mm foam interface that spreads the pressure from your polisher evenly across the surface for a consistent result. This pad brings dull paint back to a fresh gloss. The pad is available in 80mm for small spots and 130mm for larger panel surfaces.

What's inside

1 D-CON Delta Fiber Pro polishing pad medium yellow with microfibre top layer and hook-and-loop attachment.

Why this product

• Microfibre top layer for moderate correction of swirls and holograms

• 15mm foam interface spreads polishing pressure evenly across the pad

• Ideal for removing wash scratches on cured paint

• Available in 80mm and 130mm for every backing plate

• Suited to fully cured paint in the moderate correction step

How to use

1. Attach the pad centered and flat on the backing plate of your polisher (Make sure the hook-and-loop sits squarely for an even spin)

2. Apply polish and spread it at low speed (Then work at medium speed until the polish turns clear)

3. Wipe the section with a microfibre towel and check the result (For remaining swirls, repeat the section with slightly more pressure)

Watch the video

Pair it with Menzerna Medium Cut Polish 2500 and finish up with the D-CON Pro Ceramic Quick Detailer.