Lake Country CCS Polishing Pad Red

The red Lake Country CCS pad is the most powerful pad in the entire CCS range. The heavy cutting formula is intended for extremely neglected paint with heavy oxidation or deep scratches where the yellow pad is not sufficient. CCS pockets slow compound absorption so the product stays active on the paint as long as possible. Always follow with multiple finer pads to fully finish the result.

What's inside

1 red CCS foam pad by Lake Country, ready to use with DA, rotary, or drill machine

Why this product

• Heaviest cut in the entire CCS range, built for severely neglected paint with heavy oxidation

• CCS pockets slow compound absorption so it stays active on the surface as long as possible

• OEM-approved by Mercedes-Benz and Ford Motor Company

• Compatible with DA, rotary, and drill machine

How to use

1. Apply a heavy compound to the pad (Use 4-5 dots of compound on the pad surface for sufficient lubrication.)

2. Spread the product at low speed (800-1,000 rpm) (Wait until the compound is evenly spread before moving to avoid dry cutting.)

3. Polish with firm pressure in overlapping passes (Increase to 1,200-1,500 rpm. Work per section until the compound clears.)

4. Always follow with at least 3 steps: orange, white, black (The red pad leaves heavier haze that requires multiple refining steps.)

Pair this pad with Menzerna Heavy Cut Compound 1000, a compatible backing plate, and Menzerna Heavy Cut Performance Compound 400 for the most demanding correction steps.