Chemical Guys Foam Pad Conditioner

Before you switch on the polisher, your pad needs a good primer. The Chemical Guys Foam Pad Conditioner opens the pores of foam and wool pads so that compound or polish absorbs immediately. This eliminates dry friction at the start of a polishing pass, reducing scratch risk on the paint and limiting pad wear. A small addition to your routine that keeps expensive pads going considerably longer.

What's inside

1 bottle Chemical Guys Foam Pad Conditioner liquid for foam and wool polishing pads

Why this product

• Opens foam and wool pad pores so compound or polish is absorbed immediately at the start of each pass

• Reduces dry friction at the beginning of a polishing session and lowers the scratch risk on the paint

• Extends the life of expensive polishing pads by preventing wear caused by dry buffing

• Compatible with all types of foam and wool pads for both rotary and dual-action polishing machines

How to use

1. Apply a few drops of conditioner to the pad surface (Spread evenly so the entire pad surface receives a light coat.)

2. Wait 10-15 seconds and gently compress the pad (This draws the liquid into the pores for optimal absorption.)

3. Apply your compound or polish and start the machine (The conditioned pad picks up the product immediately and distributes it evenly.)

Pair the conditioner with Menzerna Super Heavy Cut Compound 300 and a T4200 orbital polisher for a complete correction setup.