D-CON Delta Polishing Cone Medium White

The D-CON Delta Polishing Cone Medium (white) fills the gap between heavy correction and finishing on small surfaces. With a cone shape tapering from 55mm to 20mm, you reach headlights, emblems, door handles, and wheel spokes without forcing a large round pad. The medium foam removes swirls, holograms, and light paint defects, and also serves as an intermediate step after the hard orange cone before a finishing pass. The universal locking mechanism and an M14 extension set let you mount it on any standard rotary or DA machine.

What's inside

1 × D-CON Delta Polishing Cone Medium White 55/20mm, ready to use via M14 extension set

Why this product

• Medium foam to remove swirls, holograms, and light paint defects on tight surfaces

• Cone shape 55mm to 20mm for accurate work on headlights, emblems, and small panels

• Universal locking mechanism, M14-compatible via extension set on rotary and DA machines

• Works as a standalone correction step or as a mid-stage pass between cutting and finishing

How to use

1. Attach the cone to the M14 extension set and mount on your polishing machine.

2. Apply a small amount of medium polish to the cone. (A pea-sized amount is sufficient for a headlight-sized surface.)

3. Work the surface in overlapping passes at low to medium machine speed. (Keep the cone moving to avoid heat build-up on sensitive surfaces.)

4. Remove residue with a clean microfiber towel and inspect for remaining swirls or holograms.

Pair it with Menzerna Medium Cut Polish 2500 for the best polishing result, the Liquid Elements T4200 as your machine, and a D-CON microfiber towel for wipe-down.