D-CON Flat Foam Pad Cutting Orange 125mm

The D-CON Flat Foam Pad Cutting (orange, 125mm) is the tool for serious paint correction on larger surfaces. The hard cutting foam removes deeper scratches and paint defects while the rounded edges move precisely along body lines without slipping. The flat design creates even pressure distribution across the full pad surface, delivering consistent correction across every curve. Compatible with 5-inch backing plates on both rotary and DA polishing machines. Pair with a heavy compound for maximum correction depth.

What's inside

1 × D-CON Flat Foam Pad Cutting Orange 125mm, for 5-inch backing plate

Why this product

• Hard cutting foam for targeted removal of deeper scratches and paint defects on body panels

• Rounded edges for precise work along body panel lines without slipping

• Fits 5-inch backing plate on rotary and DA polishing machines

• Flat design delivers even pressure across the full pad surface for consistent paint correction

How to use

1. Attach the pad to a 5-inch backing plate and mount on your polishing machine.

2. Apply 4-5 small dots of compound to the pad. (Spread the compound across the paint surface at low speed before beginning the working pass.)

3. Work the surface section by section in overlapping passes at medium machine speed. (Keep the pad moving and avoid lingering in one spot to prevent heat damage.)

4. Remove compound residue with a clean microfiber towel and inspect the surface.

Pair it with Menzerna Heavy Cut Compound 1000 for maximum correction power, the Liquid Elements T4200 for machine polishing, and a D-CON microfiber towel to wipe away compound residue.