Motip Anti-Gravel Underbody Protection White

Motip Anti-Gravel Underbody Protection White is a brushable protective coating for the underside of a vehicle and exposed bodywork areas. The formula provides high resistance to stone chips, gravel, rust, vibration and temperature changes, and resists acids and weak bases including road salt. You can apply it to any paint system without sanding the substrate. A spray gun (UBC) gives the fastest and most even coat thickness; use a brush for smaller areas or detail work. The white finish makes this product suitable for visible underbody sections that can later be overcoated with other paint systems. Sound-absorbing properties also dampen road noise and resonance through the floor pan. Available in 1 L for a complete underbody treatment.

What's inside

1 L Motip Anti-Gravel Underbody Protection in white, application by UBC spray gun or brush, overcoatable, compatible with all paint systems.

Why this product

• High resistance to stone chips, gravel and rust without sanding the substrate first

• Compatible with all paint systems and overcoatable with topcoat after drying on any bodywork layer

• Retains flexibility under vibration and resists acids and weak bases including road salt

• White finish suited for visible bodywork areas and underbody sections

• Sound-absorbing action reduces road noise and resonance transmitted through the floor pan

How to use

1. Clean the surface thoroughly and degrease before application (Remove loose dirt, rust and grease. Make sure the surface is dry. A solvent-based degreaser creates a clean adhesion base.)

2. Apply Motip Anti-Gravel with a UBC spray gun or brush (Use the UBC gun on the underbody for fast, even coverage. Use a brush for sill edges, wheel arches and narrow areas.)

3. Apply a second coat for optimal protection (Allow the first coat to surface-dry before applying the second. Check coverage on all exposed underbody areas.)

4. Allow to dry fully before overcoating or using the vehicle (The manufacturer has not published a drying time. Check that the coating feels dry to the touch before applying a topcoat or using the vehicle on the road.)

Combine Motip Anti-Gravel with Bilt-Hamber Dynax UB for additional cavity protection, Bilt-Hamber Hydrate 80 for treating rust spots and a Sundstrom SR570 respirator for personal protection when spraying.