Bilt Hamber Dynax-UC Anti-Corrosiewax

Bilt Hamber Dynax UC is a transparent anti-corrosion wax that protects steel against corrosion, water and salt. After curing it forms an approx. 50 micron thick, near-invisible self-healing film. Suitable for door sills, chassis rails, body panels and cavities where you want protection without a visible coating appearance. The vehicle can be driven after 30 minutes; full cure takes 24-96 hours. The product also adheres to lightly corroded steel, making it practical for older vehicle maintenance without needing to fully strip rust first. Always apply multiple thin coats for best adhesion and protection. Available in the convenient 750ml pack.

What's inside

1 x Bilt Hamber Dynax UC Anti-Corrosion Wax 750ml

Why this product

• Transparent film, approx. 50 micron dry: near-invisible on treated metal and door sills

• Self-healing: minor film damage seals itself, no re-treatment needed

• Hydrophobic: resistant to water and salt, even with prolonged exposure to weather

• Adheres to lightly corroded steel: no full de-rusting required before application

• Driveable after 30 minutes: fully cured after 24-96 hours for maximum protection

How to use

1. Clean the surface thoroughly with a pressure washer and a degreaser (Use Bilt Hamber Surfex HD or a comparable degreaser. Wipe down with white spirit afterwards and allow to dry completely.)

2. Apply a thin first coat with a brush or cloth (Work in thin coats for an even film. Avoid thick, dripping layers.)

3. Allow at least 30 minutes to dry and apply a second thin coat (Multiple thin coats provide better protection than a single thick coat.)

4. Allow 24-96 hours for full cure before water exposure (At temperatures below 10 degrees cure time may be longer. Avoid rain or a car wash within the first 24 hours.)

Pair Dynax UC with Bilt Hamber Surfex HD for surface preparation, Bilt Hamber Hydrate 80 as a rust converter for heavier corrosion, and a pressure washer for thorough chassis and underbody cleaning.