Mirka Gold Soft Sanding Disc 150mm P800 (20 pieces)
Foam sanding pad for matting clear coat before repair or refinish
€22.95
incl. VAT
Click image to enlarge
Brand: Mirka
Micro sanding film for wet sanding and paint spot repair
SKU: 2975507
EAN: 6416868507591
The Mirka Polarstar SR7 is a 32mm micro sanding film built for wet sanding during spot repair. Use it to correct small paint defects and remove dust nibs from topcoats and clear coats, by hand or on a sander. The polyester film backing with PSA adhesion is water resistant and relies on resin-on-resin bonding for a consistent scratch pattern. At P2500 grit (7 micron) it levels fine imperfections without damaging surrounding paint. It is a common choice in spot repair and finesse departments of paint shops, thanks to Mirka's energy-saving, low carbon curing process.
100 sanding discs, 32mm diameter, P2500 grit, polyester film backing with water resistant PSA adhesion, suitable for hand and machine sanding.
32mm micro sanding film built specifically for wet sanding small repairs
P2500 grit (7 micron) for fine corrections during spot repair
Water resistant PSA adhesion, works by hand or on a sander
Resin-on-resin bonding delivers a consistent, even scratch pattern
100 discs per pack, practical for a series of small repairs
Wet the paint surface and the sanding disc generously with water before you begin
Sand the repair area gently, using light pressure by hand or with a sander
Rinse regularly with clean water and check your progress as you go
Dry the area completely and move on to polishing for an even, glossy finish
Finish the spot repair after sanding with the Krauss A75 Accu Mini DA polisher and a Chemical Guys Hex-Logic polishing pad for an even gloss.
No reviews yet
Foam sanding pad for matting clear coat before repair or refinish
Flexible foam-backed sandpaper for uneven surfaces and hard-to-reach spots.
Flexible abrasive roll for spot repair and hard to reach areas
Flexible non-woven abrasive for hand sanding hard-to-reach spots
