Koch Chemie Fine Cut Polish F6.01

Koch Chemie Fine Cut F6.01 is a next-generation fine polish built on an aluminium oxide abrasive. It removes scratches up to P2500 grit, polish trails and processing marks on moderately to heavily weathered paintwork of passenger cars and other vehicles. Silicone- and oil-free, so you can apply a coating or wax directly after polishing without an extra degreasing step. Apply approximately 3-5 ml per section onto a foam or microfibre laminate pad. The intelligent abrasive cuts effectively without generating excessive heat in the paint layer. Available in 250 ml and 1 L for detailers and professional users handling multiple vehicles.

What's inside

Fine polish on an aluminium oxide base for machine polishing with a DA or rotary polisher.

Why this product

• Removes scratches up to P2500 and polish trails for a flawless paint finish in one pass

• Silicone- and oil-free: no extra degreasing before coating or wax application

• Next-generation aluminium oxide abrasive for deep, lasting gloss

• Suited for moderately to heavily weathered paintwork with scratches and swirl marks

• Available in 250 ml and 1 L for occasional and professional multi-vehicle use

How to use

1. Apply a small amount to the pad (Place approximately 3-5 ml of F6.01 per section onto a foam or microfibre laminate pad.)

2. Spread at low speed (Distribute the product over the working section with a DA or rotary machine at low speed before increasing.)

3. Polish the section (Work the section with even, overlapping passes. Apply light pressure at a medium machine speed.)

4. Remove residue (Wipe off remaining polish residue with a clean microfibre towel. Inspect for any remaining marks.)

After polishing with F6.01, lock in the result with a ceramic coating or wax, or reach for a Liquid Elements orbital polisher for the machine work.