Gtechniq Crystal Serum Light Ceramic Coating

Gtechniq Crystal Serum Light uses SiO2 technology to chemically bond at a molecular level with your car's clear coat. The coating builds a hard ceramic layer that protects your paint for up to five years with proper maintenance using a ceramic-safe shampoo.

How it works

Once cured, the layer withstands pH 2 to pH 12, meaning acidic bird droppings, tree sap, water spots, and alkaline wash products can no longer attack the surface. The hydrophobic barrier makes water bead in tight droplets and contaminants bond less to the treated paint, so every wash takes less effort. Crystal Serum Light is suitable for clear coat, PPF, and painted metal.

What's inside

1 bottle of Gtechniq Crystal Serum Light 30ml with built-in pipette. Sufficient for one vehicle up to mid-size class.

Why this product

• 9H ceramic hardness: hard protective layer that significantly reduces the risk of scratches on your paint

• SiO2 chemical bond: molecular connection to clear coat for durable protection up to 5 years

• pH 2 to pH 12 resistance: withstands bird droppings, tree sap, acid rain, and alkaline cleaning agents

• Hydrophobic repellency: water beads and rolls off, contaminants bond less so every wash is easier

• DIY-friendly: 30ml pipette bottle for home application, with built-in pipette for precise dosing per section

How to use

1. Prepare the paint thoroughly (Wash the car, remove iron fallout and tar spots, clay the surface, and polish out scratches. Crystal Serum Light locks in the paint condition it finds underneath.)

2. Degrease and apply per 60x60cm section (Wipe the panel with a degreaser. Load the applicator pad with 3 pipette measures and apply in overlapping strokes at 5-25 degrees Celsius, out of direct sunlight.)

3. Wait for the flash and wipe off the residue (After 20 seconds to 2 minutes the coating will glisten. Remove excess product with a clean MF1 towel in straight wipes. Rotate towels regularly.)

4. Allow full curing (Keep the car dry for at least 12 hours. Full curing takes 7 days. Do not wash or expose the coating to rain or dew during this period.)

Pair Crystal Serum Light with the D-CON Sasquatch Microfibre Towel for the levelling step, the D-CON Delta Applicator Pad for even application, and Bilt-Hamber Auto Clay for paint preparation.