D-CON Delta Pro Polishing Pad Kit

The D-CON Delta Pro Polishing Pad Kit contains the full range of 4 pads at 125mm: grey for cutting, green for polishing, yellow for finishing and white for final finishing. That means one machine and one pad set covers everything from the heaviest scratch correction to removing the last holograms, with nothing extra to order in between and no guesswork about which grade you need. Reach for the grey cutting pad on deep scratches and oxidation, always paired with a cutting compound that has enough cut. Move on to the green pad for medium correction of the lighter scratches the first step leaves behind. The yellow finishing pad builds gloss and depth, and the white final finishing pad rounds things off by removing the last holograms with a fine polish. The pads measure 125mm and fit most DA machines with a 125mm backing plate, so you don't need to buy a separate backing plate if you already have one. This kit suits anyone who polishes regularly, from a hobbyist just starting out with machine correction to the experienced detailer who wants the full correction sequence within reach without switching between different brands and grades.

What's inside

• Grey cutting pad 125 mm: The grey cutting pad for the heaviest correction: deep scratches and oxidation.

• Green polishing pad 125 mm: The green polishing pad for medium correction of lighter scratches.

• Yellow finishing pad 125 mm: The yellow finishing pad for building gloss and depth.

• White final finishing pad 125 mm: The white final finishing pad to remove holograms and round off the finish.

Why this product

• 4 pads, full range: from grey cutting to white final finishing, a grade for every stage

• 125mm pad diameter: fits most DA machines with a 125mm backing plate, nothing extra to buy

• Colour-coded per stage: grey, green, yellow and white, no mixing up steps while you work

• Everything in one order: no separate pads to source between correction stages, even on a big project

• Suits beginners and advanced users: the coarse to fine sequence guides you through the whole process

• Reusable: each pad lasts multiple polishing jobs with proper cleaning in between

How to use

1. Degrease and clean the panel (Work on clean, degreased paint, otherwise you're working dirt in rather than scratches out and risk adding fresh marks while polishing.)

2. Grey cutting pad with cutting compound (For deep scratches and oxidation, work in small sections of around 60x60cm and keep the machine moving constantly to avoid burning the paint.)

3. Green polishing pad for medium correction (Removes the lighter scratches the cutting pad leaves behind, using less pressure and a lower speed than the cutting stage.)

4. Yellow finishing and white final finishing pad (The yellow pad builds gloss, the white pad removes the last holograms with a fine polish for the sharpest finish.)

Degrease between correction stages with the D-CON Orange Degreaser & Cleaner Concentrate.