Turtle Wax Headlight Restoration Kit

Hazy or dull headlights are not just unsightly, they also reduce your visibility after dark. The Turtle Wax Headlight Restoration Kit tackles that in three steps: clean, polish and seal. It removes oxidation, surface scratches and discolouration from the plastic lens, so you are looking through a clear, transparent headlight again.

The difference from a regular polish is the finishing layer: a UV-protective sealant that shields the lens from sunlight, so yellowing is slower to return. No drill or polishing machine needed, everything is done by hand, and you can carry out the whole treatment right on your driveway or in the garage.

This kit is the accessible DIY alternative alongside more technical lines like Koch Chemie's headlight polishing sets: less professional equipment, but still a serious refresh for a fraction of the cost of headlight replacement. Besides headlights, the kit also works on taillights and other transparent plastic parts of your car. Before you start, mask off the surrounding paint and rubber trim with tape, so the polish does not accidentally end up there. That way you finish with a clean, even result and improve your visibility and safety in traffic right away.

What's inside

• Cleaning component for removing surface grime and oxidation

• Polishing component for smoothing the lens and removing scratches

• Protective UV sealant as the finishing layer

Why this product

• Removes oxidation, haze and yellowing in three simple steps: clean, polish and seal the lens

• UV-protective sealant slows down renewed discolouration of the plastic lens caused by sunlight exposure

• Fully hand-applied, no drill or polishing machine required at any point in the process

• Suitable for headlights, taillights and other transparent plastic lenses fitted to your car

• Improves your visibility and safety after dark, especially on unlit roads

• Accessible DIY alternative alongside more technical polishing lines, for a fraction of headlight replacement cost

How to use

1. Clean the headlight thoroughly with water and soap and mask off surrounding paint and rubber trim with tape. (Work in a shaded, dry spot so the polish does not dry out too quickly.)

2. Work the polishing component from the kit into the lens until oxidation, haze and scratches disappear, using even, overlapping motions. (Move in small, even circles and check your progress regularly under a bright light.)

3. Wipe off the remaining polish with a clean, dry microfiber cloth until the lens feels smooth and clear. (Avoid excess product on the lens, a thin layer is enough for clarity.)

4. Apply the UV-protective sealant as a finishing layer, spread it evenly and let it dry to guard against renewed yellowing. (Let the sealant cure fully before driving the car in the rain again.)

Mask off surrounding paint with masking tape, work the sealant in with a foam applicator, buff with a microfiber cloth and check your result under a detailing light.