Turtle Wax Headlight Cleaner & Sealant 300ml

Dull or slightly yellowed headlights don't always call for a full restoration. The Turtle Wax Headlight Cleaner & Sealant combines cleaning and protection in one 300ml bottle. Advanced polishing agents remove oxidation, haze and discolouration from the headlight lens, while the built-in sealant leaves a long-lasting protective layer.

That sealant is what sets it apart from a regular cleaner: it shields against UV rays, yellowing and environmental grime, so your result stays clear for longer. Simply apply it with a clean cloth, no polishing machine or other tools needed.

Suitable for plastic headlight lenses, plexiglass and other transparent headlight materials. For heavily yellowed lenses, pair this with the Turtle Wax Headlight Restoration Kit for a deeper treatment, but for regular maintenance this 2-in-1 bottle is often all you need. Store the bottle at room temperature and give it a light shake before use for the best result.

What's inside

One 300ml bottle with a 2-in-1 formula: headlight cleaner and UV-protective sealant in a single product.

Why this product

• 2-in-1 cleaning and protection in a single, easy-to-apply product with no pre-polish needed

• Removes oxidation, haze and discolouration from the headlight lens in just one treatment

• UV sealant slows down renewed yellowing caused by sunlight and environmental grime over time

• Applied with a clean cloth, no polishing machine or other tools required at all

• Suitable for plastic headlight lenses and plexiglass, regardless of car brand or model

• Compact size, easy to keep in the garage or trunk for maintenance on the road

How to use

1. Pre-rinse the headlight with water to remove loose dirt, dust and insect residue. (Work in the shade if possible, so the product does not dry out too quickly on the lens.)

2. Apply Turtle Wax Headlight Cleaner & Sealant to a clean cloth and work it into the lens thoroughly with small circular motions. (Use light pressure and cover the whole lens evenly for the best result.)

3. Buff the headlight with a dry cloth to a clear, even finish free of streaks. (Check the result in daylight and repeat a small spot if any haze remains.)

Mask off surrounding paint with 3M masking tape, apply with a premium applicator, buff with a microfiber cloth and check your result under a Rupes swirl finder light.