Liquid Elements Terminator V2 Rotary Polisher 125 mm 1200 W

The Liquid Elements Terminator V2 is a rotary polisher on 230 V for car paint and boats. It has rotation only, so more heat than a dual-action machine. That is why it polishes deeper and suits strong paint correction of deep scratches, swirls and weathered paint. The 1200 W motor runs at a variable 1000 to 3000 rpm. The backing plate is 125 mm with hook-and-loop and M14 thread, the power cord is 8 m and the machine weighs 2.5 kg. A case with spare carbon brushes and tools comes with it. Note: the machine is only suitable for professional use or for people with enough experience. Wrong use can burn the paint. Pads with 125 mm hook-and-loop and polish are not included. You choose those yourself for the paint you are going to correct, so you build the set around the job.

What's inside

Machine, 125 mm hook-and-loop backing plate, Liquid Elements case, spare carbon brushes, hex key, spanner and manual

Why this product

• Rotation only: more heat and cutting power for deep scratches, swirls and weathered paint

• Variable 1000 to 3000 rpm: you adjust the speed to the job

• 1200 W on 230 V: a motor for car paint and boats, with an 8 m power cord

• 125 mm hook-and-loop backing plate: M14 thread, weight 2.5 kg

• Complete in a case: spare carbon brushes, hex key, spanner and manual

How to use

1. Fit the pad and start at low speed (Put a 125 mm hook-and-loop pad on the backing plate. Start at the lowest speed and only build up once you have the machine under control.)

2. Keep the machine moving constantly (Never stay in one spot, because rotation produces more heat and can burn the paint. Work in overlapping passes.)

3. Avoid edges and sharp lines (On edges and sharp lines the risk of burning through is greatest. Work there carefully and with little pressure.)

4. Check the paint regularly (Wipe the spot and see whether the correction works. A softer pad or a lower speed is safer than more pressure.)

Also take a look at our Koch Chemie Heavy Cut Polish H9.01, the D-CON clay lube and the pad cleaning brush.