Mirka Abranet Ace Sanding Net 150mm P240 (50 pieces)

The Mirka Abranet Ace is a sanding net with an open mesh structure, built for near dust-free dry sanding. In grit P240 you use this net for leveling the surface right before the basecoat. Because sanding dust passes straight through the net into your extraction system, the surface stays visible and the grit does not clog. That gives you consistent sanding performance across the full life of the net, longer than traditional sandpaper. The hook-and-loop backing fits most random orbital sanders and lets you switch grits fast.

What's inside

1x Mirka Abranet Ace sanding net, grit P240, box of 50 pieces

Why this product

• Open mesh structure for near dust-free sanding

• Works with any sander that supports dust extraction

• Longer lifespan than traditional sandpaper, the grit does not clog quickly

• Hook-and-loop backing for fast grit changes

• Consistent sanding performance across the full life of the net

How to use

1. Attach the sanding net to the hook-and-loop backing plate of your sander. (Line up the holes in the net with the extraction holes in the backing plate.)

2. Connect the sander to a vacuum or extraction system.

3. Sand with light, even pressure in overlapping passes across the surface.

4. Wipe the surface with a degreaser before spraying the basecoat.

Pair this net with a Mirka hand sanding block for the edges, a DEROS sander for large panels, 3M masking tape to protect adjacent parts, and a Sundström half mask to protect your lungs.