Krauss Carbon Brushes for S08 Polisher

Carbon brushes wear out after a few years or heavy use of your S08 polisher. If your machine suddenly makes strange noises or the motor stops running normally, it's not necessarily broken: replacing the carbon brushes often solves it. Many people buy a new machine as soon as the motor gets noisy, while this problem is easy to fix with just a few minutes of work. With this set of 2 original carbon brushes, your S08 looks and sounds like new again, without you having to buy a whole new machine right away.

What's inside

1x set of 2 carbon brushes for the Krauss S08

Why this product

• Set of 2 original carbon brushes, always replace together

• Original Krauss part made specifically for the S08

• Fixes a noisy or stalling motor quickly

• Saves you from buying a whole new machine

• Self-replaceable in a few minutes, no mechanic needed

How to use

1. Switch off the machine, unplug it and let it cool down for a few minutes.

2. Remove the screw on the back of the machine, just below the speed control, and carefully take off the plastic housing.

3. Carefully remove both carbon brushes one by one, watching out for the springs, which can pop out.

4. Fit the new carbon brushes, put the housing back into place and tighten the screw firmly again.

Get your S08 back to work with a Chemical Guys Hex-Logic polishing pad, Koch Chemie compound, a microfiber towel and a backing plate.