NOCO Boost Pro GB150 Lithium Jump Starter 12V 3000A

The NOCO Boost Pro GB150 is a powerful lithium jump starter for 12V batteries with 3000 A peak current. It starts gasoline engines up to 9.0 L and diesel engines up to 7.0 L, such as cars, SUVs, trucks, boats and campers, and delivers up to 80 starts per charge of its 88 Wh battery. Besides USB it has a 12V XGC input that recharges it in 2 to 3 hours, and a 12V output of 15 A to power 12V devices. The UltraSafe connection is spark-free and has reverse-polarity protection, for 12V lead-acid (wet, gel, MF, EFB and AGM). Over USB (5V 2.1 A) you charge up to 6 phones per battery charge. The LED flashlight gives 500 lumens, the housing is IP65 (with the ports closed) and the weight is 2.72 kg, or 3.4 kg with clamps and accessories.

What's inside

Jump starter with clamps, XGC extension cable, XGC 12V plug and socket, USB to micro-USB cable and microfiber storage pouch.

Why this product

• 3000 A peak current for gasoline up to 9.0 L and diesel up to 7.0 L

• Up to 80 starts per charge, 88 Wh lithium-ion battery

• Fast charging via 12V XGC input in 2 to 3 hours, 12V output of 15 A as power supply

• Spark-free with reverse-polarity protection, IP65 with ports closed

• USB power bank for up to 6 phone charges and a 500-lumen LED flashlight

How to use

1. Check polarity: red to plus (+), black to minus (-) on the vehicle battery (UltraSafe is spark-free and has reverse-polarity protection; secure both clamps firmly and check that they are seated properly)

2. Switch the GB150 on and wait until it is ready to start (Follow the LED indications described in the NOCO manual)

3. Start the engine as you normally would (No start? Consult the NOCO manual)

4. Remove the clamps once the engine is running (Then recharge the GB150 via the 12V XGC input (2 to 3 hours) or via USB so it is ready again)

A handy companion to your jump starter: more tools for maintaining your vehicle.