Bilt Hamber auto-foam

auto-foam by Bilt Hamber is a concentrated snow foam for use with a pressure washer. The neutral pH keeps it safe on all protective layers: wax, sealant or ceramic coating. The thick, clinging foam lifts road grime and dirt without surface contact, minimising the risk of introducing scratches before the rinse. Dilutable up to 1:100, the 5 litre bottle goes a long way. Start at 1:10 as a baseline and adjust based on desired foam thickness and level of soiling. Allow 2 to 5 minutes dwell time before rinsing and make sure the foam does not dry on the surface. The high concentration makes auto-foam cost-effective for detailers who wash regularly.

What's inside

5 litre concentrated snow foam, dilutable to 1:100 for economical use per wash

Why this product

• Neutral pH: safe on ceramic coatings, sealants and waxed paint without damage

• Dilutable up to 1:100 for economical use, 5 litres goes a long way

• Rich, clinging foam lifts road grime without surface contact

• Minimises scratch risk as the first step before a contact wash

• Dwell time 2 to 5 minutes for optimal cleaning performance

• 5 litre size suitable for professional and regular home use

How to use

1. Dilute auto-foam in the foam cannon reservoir, starting point 1:10. (Adjust the ratio based on desired foam thickness and level of soiling. Up to 1:100 is possible for lightly soiled vehicles.)

2. Spray the car from bottom to top with an even layer of foam. (Work on a cool surface out of direct sunlight to prevent the foam from drying before it can act.)

3. Allow 2 to 5 minutes dwell time, make sure the foam does not dry on the surface.

4. Rinse from top to bottom with the pressure washer. (For heavily soiled vehicles, follow with a contact wash using a wash mitt and two-bucket method.)

Use auto-foam as your first step, follow with a soft wash mitt and finish with a quality drying towel for a scratch-free result.