B-TEC IR-X2 Short-Wave Infrared Dryer 2 Cassettes 230V

The B-TEC IR-X2 (7300137) is a professional short-wave infrared dryer with 2 cassettes for bodyshops and detailing studios aiming for shorter per-vehicle turnaround times. At 2040 W with a drying area of 60 × 80 cm per session, the IR-X2 significantly accelerates drying of waterborne and solvent-based paints, primers, and ceramic coatings compared to air drying. The hydraulic arm (15 to 180 cm height) allows precise positioning over any body panel. The 10 m cable and swivel wheels provide full workshop mobility without extension leads. An adjustable timer monitors drying time per section for controlled results.

What's inside

1 x B-TEC IR-X2 short-wave infrared dryer with 2 cassettes, 230V, 10 m cable, hydraulic arm, swivel wheels, and timer

Why this product

• 2040 W short-wave infrared for deep, fast drying of paint, primer, and ceramic coatings

• 60 × 80 cm drying area per session with 2-cassette configuration

• Hydraulic arm adjustable from 15 to 180 cm for precise positioning over any panel

• 10 m cable and swivel wheels for full workshop mobility without extension leads

• Adjustable timer for controlled drying cycles per section

How to use

1. Position the lamp (Set the hydraulic arm to the required height (15-180 cm) and aim the 2-cassette head at the drying section of 60 × 80 cm.)

2. Set the timer (Set the timer to the drying time appropriate for your paint or coating type. Consult the manual for recommended times per product.)

3. Dry section by section (Let the lamp run until the timer completes. Then roll the unit on its swivel wheels to the next section of the vehicle.)

4. Let cool and inspect (Let the surface cool before touching or applying further coats. Verify the paint is fully dry and tack-free.)

Pair with Gtechniq Crystal Serum Light for ceramic coating applications, or use with Colad Anti-Dust Static Coating for a dust-free workshop environment.