Werther Scissor Lift 263 3000kg

The Werther 263 is a mobile scissor lift for professional use in an auto shop or workshop, with a lifting capacity of 3000 kg. Dual hydraulic cylinders with a mechanical lock raise the vehicle in 30 seconds to a lift height of 955 mm and lower it again in 35 seconds. The length is adjustable between 1400 and 1932 mm and the width is 1770 mm, making the lift suited for most passenger cars. The lift is specifically suited for low cars, so driving on and off goes without hassle and you can bring even lower models onto the lift with confidence. The 1.1 kW motor at 400V/50Hz keeps power consumption limited while still delivering enough force for daily use in a busy workshop. Thanks to the solid construction, you place the lift stably on a flat floor, without extra foundation work or anchoring. The mechanical lock lets you work safely underneath the vehicle, even if hydraulic pressure drops.

What's inside

One complete Werther 263 scissor lift with 3000 kg capacity, dual hydraulics, mechanical lock and 1.1 kW motor, ready for installation.

Why this product

• 3000 kg lifting capacity for most passenger cars in the workshop

• Dual hydraulic cylinders with mechanical lock for safe working underneath the vehicle

• Adjustable length from 1400 to 1932 mm and a width of 1770 mm for different vehicle sizes

• Suited for low cars thanks to the easy drive on and off

• Solid construction, stable to place on a flat floor without foundation work

• 1.1 kW motor keeps power consumption limited during daily use

How to use

1. Drive the vehicle centered onto the lift and engage the handbrake. (Make sure the weight is evenly balanced over the lift pads for a stable lift.)

2. Position the lift pads under the vehicle's recommended lift points. (Check your vehicle's manual for the exact lift points to avoid damaging the underbody.)

3. Raise the lift to working height of up to 955 mm in about 30 seconds and engage the mechanical lock. (The dual hydraulic cylinders provide a smooth, stable motion while lifting.)

4. Before lowering, release the lock first and let the lift descend in about 35 seconds, in a controlled way. (Make sure no one is underneath the vehicle before you let the lift come down.)

Work safely with a Sundstrom half mask and keep your vehicle's battery topped up with a CTEK charger during longer sessions on the lift.