Krauss PDR Light 5 LED with Stand 12V

The Krauss PDR light is built for paintless dent repair, using 5 LED strips that you can each switch individually between white and amber light. Cool white delivers 1200 lumens, warm amber gives 850 lumens, both adjustable through the built-in dimmer for precise control over the reflection you need.

By watching how the light lines reflect off the panel, you spot the exact position of a dent and guide leverage or glue-pulling tools with confidence. The same reflections help you check for residual marks once the repair is done. The included stand keeps the light steady at 920 x 180 x 25mm, giving even coverage across the whole work area while leaving both hands free.

Running on 12V, this light fits straight into a standard workshop setup, suited to tracking down small door-edge dings and working through a full panel of hail damage.

What's inside

1x Krauss PDR light with 5 individually adjustable LED strips, incl. stand and built-in dimmer for white and amber light.

Why this product

• 5 LED strips, each individually switchable between white and amber light for targeted reflection control

• 1200 lumens cool white or 850 lumens warm amber light, fully dimmable via the built-in control

• Included stand for a stable, hands-free setup during longer sessions

• 920 x 180 x 25mm work surface gives even coverage across the whole panel

• 12V power supply suited to workshop use or working on location at a customer's site

How to use

1. Position the light on the stand about an arm's length from the panel and aim the LED strips at the area where you suspect a dent.

2. Choose the colour mode per strip, white for sharp edge detection and amber for a softer transition, and set the brightness with the dimmer.

3. Watch how the reflected lines behave on the paint; a break or distortion in the lines points to the exact position of the dent.

4. Use the same reflections during the repair to guide leverage or glue-pulling work with control, and check for residual marks afterwards.

Pair the PDR light with a Krauss coating thickness gauge to verify panel thickness, work on a Krauss bumper stand, and protect your hands with Colad nitrile gloves.