Krauss PDR Light 3 LED Adjustable Brightness Tripod 12V

Paintless dent repair is all about seeing the dent, not feeling it. This PDR light delivers 1200 lumens of white light and 850 lumens of amber light through three independently adjustable LED strips, so you can choose the right colour temperature for every panel surface. The reflected light pattern reveals bosses, dents and residual creases that stay invisible under normal daylight.

The built-in dimmer controls the intensity of each LED strip, letting you adjust the sharpness of the reflection at every stage of the repair: bright for initial detection, softer for the final check. The included tripod holds the light steady in position, so you can work with both hands without constantly repositioning the setup.

Running on 12V, the light works directly in the workshop or on location for mobile dent repair services. For PDR technicians hunting daily for the smallest imperfections in bodywork, this combination of adjustable colour temperature and a fixed setup is a practical tool for locating and verifying repair work.

What's inside

PDR light with three adjustable LED strips, a built-in tripod for a stable setup and a 12V connection cable for direct workshop use.

Why this product

• 1200 lumen white light and 850 lumen amber light, each LED strip adjustable on its own

• Built-in tripod for a stable, hands-free setup throughout the repair

• Three LED strips reveal bosses and residual creases through the reflection pattern

• Dimmable for sharp initial detection or a subtle final check

• 12V connection for direct use in the workshop or on location

How to use

1. Place the tripod on a stable surface and aim the light at the panel you want to inspect.

2. Connect the light to a 12V power source and select the LED colour you need, white for sharp detection or amber for a softer reflection.

3. Adjust the brightness per strip with the dimmer until the reflection on the bodywork clearly shows the dent or boss.

4. Reposition the tripod during the repair to keep aiming the reflection angle at the area you're working on.

Pair the light with a stainless steel panel stand for a stable setup and disposable nitrile gloves to keep your hands clean.