Chemical Guys Rebound Scratch & Swirl Remover

Rebound is the one-step polish that lifts scratches, swirls and water spots out of motorcycle paint and leaves behind a mirror shine, without needing to use several products in sequence. The formula contains refined, diminishing abrasives that get finer as you polish, so you start by working out scratches and end with a clear, deep shine. Rebound works on any paint color, clear coat, carbon fiber and glossy plastic fairings, and is also safe on clear optical plastic windshields. The product contains no fillers or wax, so you see the real result on the paint instead of a temporarily camouflaged effect that disappears after a few washes. The formula suits both hand polishing and machine work with an orbital or rotary polisher, with a working time that matches the pace of either method. Use Rebound to permanently remove swirls, scratches and minor paint defects and bring back your motorcycle's original shine and clarity.

What's inside

1 bottle of Chemical Guys Rebound Scratch & Swirl Remover, ready to use

Why this product

• One-step polish: cleans, removes scratches and seals in a single pass

• Diminishing abrasives: refine themselves while polishing for an increasingly deep shine

• Works on any paint color: also suitable for clear coat, carbon fiber and glossy plastic

• No fillers or wax: you see the real result, no temporary camouflage

• By hand or machine: suitable for orbital and rotary polishers

How to use

1. Wash and dry the motorcycle thoroughly, do not work in direct sun (Dirt on the paint can cause new scratches while polishing)

2. Apply a small amount of Rebound to a polishing pad or applicator (Start with little product, you can always add more)

3. Work the product in with moderate pressure until it feels almost dry (By hand in overlapping circles, by machine at low to medium speed)

4. Buff off with a clean microfiber towel for a mirror shine without residue (Check in bright light that all swirls are gone)

After polishing with Rebound, check for hidden swirls under the residue with Chemical Guys Wipe Out and a soft microfiber towel.