ScanGrip Nova 4K C+R Work Light

The ScanGrip Nova 4K C+R combines a battery and a cable connection in one work light, so you're never tied to an outlet but always have power on hand. You switch between 500 and 4000 lumens, from an economical setting for short jobs to full power for detailed inspection. The COB LED technology delivers a single uniform light source with a high CRI rating close to daylight, so you judge colors and paint nuances reliably. On the lowest setting the battery lasts up to 14 hours, at full power you get around 1 hour of runtime. The housing is die-cast aluminum in a slim, impact-resistant design, and the flexible bracket lets you position the light at any angle or hang it up. Ideal for mobile use on location or as a fixed light in the workshop when you choose the cable.

What's inside

1x ScanGrip Nova 4K C+R work light with battery and cable

Why this product

• Light output adjustable from 500 to 4000 lumens for any job

• Works both on the built-in battery and plugged in with the cable

• Up to 14 hours battery life on the lowest setting for extended mobile use

• High CRI COB LED for accurate, natural-looking color rendering

• Die-cast aluminum housing in a slim, robust, impact-resistant design

• Flexible bracket lets you set the light at any angle or hang it up

How to use

1. Fully charge the battery or plug in the cable if you need more than an hour of runtime. (At full power the battery lasts about 1 hour, the cable gives you power without a time limit.)

2. Choose the light level between 500 and 4000 lumens based on your job. (A low setting saves the battery for short jobs, use full power for detailed inspection work.)

3. Attach the flexible bracket where you need it and aim the beam. (The high CRI rating means colors and paint nuances look the same as they would in daylight.)

4. Switch off the light after use and wind the cable around the handle. (This keeps the cable from kinking and leaves the light ready for the next job.)

Finish your paintwork under bright light with Koch-Chemie 1K Nano Sealant and Rupes Uno Protect to instantly see if the coating sits evenly.