Shiny Garage Glaze Paint Glaze 500 ml

Glaze Paint Glaze is a mix of acrylic polymers, synthetic waxes and fillers that adds extra shine and depth to the paint. The glaze optically fills small imperfections and is especially recommended on black cars, where the wet look effect is most clearly visible. Always use the glaze as a preparation step before your favourite wax or sealant, and not as final protection on its own. Apply a small amount to clean, dry and cool paint with an applicator or polishing pad, let it dwell for 2 to 5 minutes so the product can bond with the surface, and buff off the residue with a clean microfibre towel. The result is a smooth, glossy base that is ready for the next protective layer and helps wax or sealant bond better.

What's inside

One bottle of Glaze Paint Glaze, 500 ml, ready to use as a preparation step before waxing.

Why this product

• Optically fills small imperfections and noticeably increases the depth of the paint

• Gives a wet look shine that stands out especially on black and dark cars

• An ideal preparation step before your favourite wax or sealant, priming the surface

• Fast result thanks to a short cure time of only 2 to 5 minutes

• Safe on both light and dark paint colours and sensitive surfaces

How to use

1. Make sure the paint is clean, dry and cool before you start, for example after a thorough paint cleaner pass.

2. Apply a small amount of glaze per panel with an applicator or polishing pad, in a thin layer.

3. Let the glaze dwell for 2 to 5 minutes so it can bond properly with the paint. (Work in small panels so you can keep to the timing accurately.)

4. Buff off the residue with a clean microfibre towel and follow up as soon as possible with your wax or sealant.

Buff off the residue with the Bilt Hamber Foam Applicator Pad for an even result.