Shiny Garage Drop Off Hydrophobic Glass Coating 150ml

The Shiny Garage Drop Off is a hydrophobic coating you apply to the outside of your car windows: windshield, side windows and rear window. The formula forms a water repellent layer that already shows a visible effect from around 50 km/h, water droplets are literally blown off the glass instead of blurring your view during rain. Clean the window first with a proper glass cleaner, then spray Drop Off onto a microfiber applicator and spread it over the glass. Let the layer sit for 5 to 8 minutes and then buff dry with a clean microfiber towel. Apply a second layer after around 1 hour for the full durability, and keep the window dry for at least 6 hours before it comes into contact with water. With two layers applied, the coating lasts up to 6 months on the windshield and up to 12 months on the side windows, more than enough for a full winter of rain without spraying a fresh layer every week.

What's inside

One 150 ml bottle of Drop Off with a sprayer, enough for several windows applied in two layers.

Why this product

• Works from 50 km/h: water droplets blow straight off the glass

• Up to 6 months on the windshield: and up to 12 months on the side windows with 2 layers

• Better visibility in the rain: without relying harder on your wipers

• Quick to apply: 5 to 8 minutes dwell time, then buff dry with a microfiber towel

• Compact 150ml bottle: enough for several window treatments

How to use

1. Clean the window thoroughly with a glass cleaner (Remove any grease, wax or old coating residue first for the best bond on the glass)

2. Spray Drop Off onto a microfiber applicator and spread over the glass (Let the layer sit for 5 to 8 minutes before you continue)

3. Buff dry with a clean microfiber towel (Work in overlapping passes until the glass is clear and fully streak-free)

4. Apply a second layer after 1 hour (Then keep the window dry for at least 6 hours before it touches water)

Clean the glass first with the D-CON Streak Free Glass Window Cleaner and spread the coating with a Koch Chemie Application Sponge for the best result.